基于流场特性的管内检测机器人的外形优选研究

管道内检测机器人的结构形状是影响其运动学、动力学特性的关键因素,在机器人设计中占有重要地位。在合理提出一些基本假设后,用二阶迎风差分格式离散管道内检测机器人附近流场的控制方程,并用SIMPLE算法求解,得到了7种不同形状的管道内检测机器人所受的差压驱动力及其周围的流场信息,并对这几种结构的CFD特性作了比较。最后综合空化条件、驱动力、腔内有效体积和加工难度等因素,确定了上游半球形结构为设计形状。     

Scheduling a production–distribution system to optimize the tradeoff between delivery tardiness and distribution cost

We consider a make‐to‐order production–distribution system with one supplier and one or more customers. A set of orders with due dates needs to be processed by the supplier and delivered to the customers upon completion. The supplier can process one order at a time without preemption. Each customer is at a distinct location and only orders from the same customer can be batched together for delivery. Each delivery shipment has a capacity limit and incurs a distribution cost. The problem is to find a joint schedule of order processing at the supplier and order delivery from the supplier to the customers that optimizes an objective function involving the maximum delivery tardiness and the total distribution cost. We first study the solvability of various cases of the problem by either providing an efficient algorithm or proving the intractability of the problem. We then develop a fast heuristic for the general problem. We show that the heuristic is asymptotically optimal as the number of orders goes to infinity. We also evaluate the performance of the heuristic computationally by using lower bounds obtained by a column generation approach. Our results indicate that the heuristic is capable of generating near optimal solutions quickly. Finally, we study the value of production–distribution integration by comparing our integrated approach with two sequential approaches where scheduling decisions for order processing are made first, followed by order delivery decisions, with no or only partial integration of the two decisions. We show that in many cases, the integrated approach performs significantly better than the sequential approaches. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

火炮动态后坐装置有限元分析与优化

活塞缸是火炮动态后坐装置中的关键部件,其结构强度设计是整个实验装置强度设计的核心。利用I-DEAS软件,在对其进行实体建模和有限元网格划分的基础上,计算了活塞缸整体的应力应变值,得到了活塞缸工作时的应力应变图,并对其结构中应力状况恶劣的部位进行了结构优化。     

用动态模拟方法实现C程序输入变量的取值分析

程序输入变量取值范围的确定对于测试数据的选取,尤其对边界值分析,有着直接的指导作用.一般情形下,通过对源程序进行数据流和相关性分析,可实现输入变量的取值分析.但对某些有特殊取值限制要求的表达式,用静态分析方法,难以实现其输入变量的取值分析.为此,采用动态模拟的方法,对有特殊取值限制要求的表达式,进行输入变量的取值分析.实验表明,该方法是行之有效的.     

在C#中通过数据库实现树视图无级动态维护

就树视图与数据库的结合实现树视图的无级动态维护提出了一种解决方法 ,进而拓展了树视图的功能 ,使其能够得到更多的使用。     

无人飞艇平台摄像机防振研究

无人飞艇作为理想的信息平台,在预警、反恐、侦察监视和通信等方面发挥着重要作用。而艇载侦察监视设备CCD摄像机受到飞艇发动机振动的影响,会对成像产生消极影响。为此,分析了影响飞艇摄像机的成像质量的因素,采用被动减振的方案,达到了有效克服振动的目的。     

超空泡航行体双层壳结构动力稳定性分析

针对超空泡航行体轴向受力特点,建立超空泡航行体双层壳结构有限元模型,对结构动力稳定性进行分析.数值计算表明,当壳间实肋板厚度增大或环向肋骨数量和尺寸增加时,动力失稳区域整体下移,不稳定激发频率下降,失稳区域宽度减小幅度较小;当壳间间距减小或纵向肋骨数量和尺寸增加时,双层壳结构动力不稳定激发频率上升,动力失稳区域宽度较大...     

Scheduling with centralized and decentralized batching policies in concurrent open shops

This article considers batch scheduling with centralized and decentralized decisions. The context of our study is concurrent open shop scheduling where the jobs are to be processed on a set of independent dedicated machines, which process designated operations of the jobs in batches. The batching policy across the machines can be centralized or decentralized. We study such scheduling problems with the objectives of minimizing the maximum lateness, weighted number of tardy jobs, and total weighted completion time, when the job sequence is determined in advance. We present polynomial time dynamic programming algorithms for some cases of these problems and pseudo‐polynomial time algorithms for some problems that are NP‐hard in the ordinary sense. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 58: 17–27, 2011     

Cache漏流功耗的自适应优化:动态容量调整

当集成电路制造工艺水平发展到超深亚微米阶段,漏流功耗所占的比例越来越大,成为微处理器功耗的重要来源.漏流功耗同电压、漏电流和晶体管数量等因素密切相关.Cache是微处理器中面积较大的部件,对其漏流功耗进行优化是微处理器低功耗设计的首要任务.除了采取工艺上的改进措施外,cache漏流功耗可以通过把握或改变cache的工作...     

基于动态贝叶斯网络的弹道导弹态势评估模型研究

针对弹道导弹态势评估的特点,分析了弹道导弹的作战过程和弹道导弹主动段作战特点。在此基础上,给出了动态贝叶斯网络用于弹道导弹态势评估的建模过程,建立了基于动态贝叶斯网络的弹道导弹态势评估模型,并依据观测到的数据对模型进行了仿真,结果表明,将动态贝叶斯网络应用于弹道导弹的态势评估模型是可行的,该模型能够对飞行中的弹道导弹态势快速准确作出评估。